top of page

Enabling debug logging for vRA's horizon


Execute below commands to enable debug logging for vRA's horizon and connector components.

sed -i 's/rootLogger=INFO/rootLogger=DEBUG/g' /usr/local/horizon/conf/saas-log4j.properties


sed -i 's/rootLogger=INFO/rootLogger=DEBUG/g'/usr/local/horizon/conf/hc-log4j.properties


There is no restart required after changing these settings


Execute below commands to disable debug logging

sed -i 's/rootLogger=DEBUG/rootLogger=INFO/g' /usr/local/horizon/conf/saas-log4j.properties


sed -i 's/rootLogger=DEBUG/rootLogger=INFO/g' /usr/local/horizon/conf/hc-log4j.properties


Again there is no restart needed after reverting back

76 views0 comments
bottom of page